LLDPE Pulverizer adopts new design disk. It uses SKD11 materials imported from Japan.


  1. With water cycle and wind cooling, LLDPE Pulverizer can be applied into processing heat sensitive material.
  2. With the tail-wagging air stream (partly eddy flow) produced by the tail-wagging of the main shaft capstan of LLDPE Pulverizer, the input tail-wagging materials collide strongly with the board and the cutting blade, and was grinded into powdery (without sieving).
  3. Both the board and the cutting blade are made of abrasion-resistant steel, with excellent performance after heat treatment.
  4. With severeness of framework, the volume of LLDPE Pulverizer is quite small. If you open door closure, you can maintain it. It is completely airproof and without any dust leakage.
  5. With winding reclaiming equipment, LLDPE Pulverizer is features by cooling materials evenly, quick cooling and some other characteristics.

Main Technical Parameter


MF-350 MF-500 MF-600
Main motor power 22kw 37kw


Draft fan power

3kw 5.5kw 7.5kw
Vibration sieve power 0.55kw 0.75kw


Air shutter power

0.75kw 0.75kw 0.75kw
Output 100-150kg/h 180-280kg/h 280-380kg/h
Dimension 1700*1450*3700mm 1900*1700*3900mm 2100*1900*4100mm
Weight 1680kg 2200kg


Leave a Reply